JACQUET Nederland offers a wide stainless steel plates range (austenitic, duplex, refractory, ferritic, superaustenitic, martensitic, …) intended for the main end markets : food processing, energy, water treatment, desalination, paper pulp, etc.
Plates
- Thicknesses : 0.3 to 150 mm
- Max. dimension : 3000 x 12000 mm
Tolerances
Thickness and flatness (European referential):
- SO 9445-2 for cold rolled sheets
- ISO 9444-2 for continuously hot rolled plates (Cut from coils)
- ISO 18286 for hot rolled plates (known as QUARTO plates)
Thickness and flatness (American referential):
- ASTM A480
Flatness tolerances do not apply to cut pieces
Round bars
- Diameters : 6 to 400 mm
- Grades : various qualities see our stock list.
Grades
| W. Nr. | UNS | ASTM/AISI | EN | Max. thicknesses in stock (mm) |
| 1.4000 | S41008 | 410S | X6Cr13 | 50 |
| 1.4006 | S41000 | 410 | X12Cr13 | 75 |
| 1.4301 / 1.4307 | S30400 / S30403 | 304 / 304L | X5CrNi18-10 / X2CrNi18-9 | 150 |
| 1.4313 | S41500 | – | X3CrNiMo13-4 | 100 |
| 1.4401 / 1.4404 | S31600 / S31603 | 316 / 316L | X5CrNiMo17-12-2 / X2CrNiMo17-12-2 | 150 |
| 1.4410 | S32750 | – | X2CrNiMoN25-7-4 | 80 |
| 1.4432 | S31603 | – | X2CrNiMo17-12-3 | 100 |
| 1.4435 | S31603 | 316L(Mo+) | X2CrNiMo18-14-3 | 70 |
| 1.4436 | – | – | X3CrNiMo17-13-3 | 100 |
| 1.4438 | S31703 | 317L | X2CrNiMo18-15-4 | 75 |
| 1.4462 / – | S31803 / S32205 | – | X2CrNiMoN22-5-3 / – | 100 |
| 1.4539 | N08904 | 904L | X1NiCrMoCu25-20-5 | 80 |
| 1.4541 / 1.4878 | S32100 / S32109 | 321 / 321H | X6CrNiTi18-10 / X8CrNiTi18-10 | 120 |
| 1.4542 | S17400 | 630 | X5CrNiCuNb16-4 | 60 |
| 1.4547 | S31254 | – | X1CrNiMoCuN20-18-7 | 50 |
| 1.4550 | S34700 / S34709 | 347 / 347H | X6CrNiNb18-10 | 25 |
| 1.4571 | S31635 | 316Ti | X6CrNiMoTi17-12-2 | 100 |
| 1.4828 | – | – | X15CrNiSi20-12 | 90 |
| 1.4833 | S30908 | 309S | X12CrNi23-13 | 50 |
| 1.4835 | S30815 | – | – | 50 |
| 1.4845 | S31008 | 310S | X8CrNi25-21 | 100 |
| 1.4948 | S30409 | 304H | X6CrNi18-10 | 100 |
Other grades and dimensions, contact us.
More information
The term “stainless steel” is a generic word including over 100 different types of alloys.
These alloys have one thing in common: thanks to their chromium content, they do not require surface protection to fight against the various types of corrosion. In fact, the chromium combined with the oxygen in the air and water creates a “passive layer” of oxide on the surface.
Stainless steels are divided into 4 main groups: austenitic, austeno-ferritic (Duplex), martensitic and ferritic. There are also families of stainless steels with specific characteristics: refractory heat-resistant steels, resistant to very high temperatures, and superaustenitic steels for extremely corrosive environments.
With chromium and nickel accounting for 15 to 26% and 5% to 25% respectively of their composition, stainless steels are generally non-temperable and non-magnetic.
De 18/10 inscriptie op een mes duidt op een samenstelling van 18% chroom en 10% nikkel.